Recycled Engagement Ring

posted in: Commissions 0

I was recently asked to remodel a shop bought engagement ring. It was made in a design which just didn’t suit the customers lifestyle and as a result of this the diamond had come out the setting. The customer wanted to continue to wear the sentimental stone but felt that it would simply break again if I repaired the current ring.

Now this lady freely admits to being heavy handed so the new ring had to be super sturdy, low (to avoid catching on things) and needed to suit her other rings. The metal that I had to work with was 18ct White Gold but the customer has a soft spot for red gold and wanted to incorporate some of that too.

We worked out a design with a stripe of red gold, which would add a splash of colour but still match the rest of her white gold wedding set. She also loved the idea of a really handmade finish so hammering the surface was a good way of achieving this.

Recycling the Old Ring:

I began work by sawing the old 18ct white gold ring in two and rolling these halves into new pieces of wire. I bought square, 9ct Red Gold wire, and rolled that down to match the white gold. I bent these wires round into rings, soldered up the joints and was left with three rather thin new rings:

Making the New Ring:

I layered these thin rings up (double and then triple checking that I had the red one in the middle!) before clamping them with cotter pins. These held everything in place while I soldered the stack together. You can just see in the photo that I’ve lined up the solder joints in all three of the narrow rings so that I can find it again. I’ll cut the final ring here to add the setting for the diamond.

Once the ring had cooled and I’d cleaned it up I filed the surface smooth and could begin to see neat stripes of colour appearing.

I textured the ring by gently hammering it against a steel mandrel. Using the ball head of a hammer I built up a texture of small, round hammer marks which catch the light beautifully.

From here I cut through the ring and filed out a gap to fit a tapered circular tube. This will form the new setting for the diamond. I soldered this into place (conveniently forgot to take a photo) and the main structure of the ring was done. From there I polished it, sent it off for hallmarking in Birmingham and set the stone.

Finished Ring – Recycled 18ct White Gold, 9ct Red Gold & Diamond:

The resulting ring is a really nice blend of the old and the new. Using the original gold and a sentimental diamond keeps a connection to the past but provides and new ring that can be worn and enjoyed.

 

 

Inherited Pearl Ring

posted in: Commissions 1

This ring began when a client brought me a row of pearls that she’d inherited. I work with pearls a lot, I trained as pearl stringer after university and so I have a good understanding of them and an appreciation for their qualities.

The main issue with any pearl taken from a row of pearls is that it has a hole drilled all the way through it. This usually makes it unsuitable for setting into rings or studs, as you’re restricted by the visibility of the hole.

However, this client wanted a ring to allow her to keep one of the inherited pearls close to her and after a little thought we came up with a design that would allow this.

Design:

Her saltwater pearls are a wonderfully warm, creamy colour so while the bulk of the ring would be silver I added a touch of 9ct red gold to bring out this warmth. The high sides of the setting are designed to protect the relatively soft pearl which is riveted into the ring using the existing drill hole.

In the end we opted for a fusion of designs A & B, squaring the corners of the box holding the pearl and making the setting entirely out of red gold.

Making:

Soldering the gold setting onto the silver ring was a tricky process. The whole thing needed to be kept square and parallel or the two sides wouldn’t grip the pearl correctly. After a bit of trial and error I rigged something up on a honeycomb soldering block that kept it all in line so that I could solder the two metals together.

A bit of cleaning up followed that before I could polish the ring (to bring out the hammer marks on the silver) and check the fit of the pearl with a piece of wire:

Once it was riveted into place the pearl sat perfectly within the red gold ‘box’ setting and balanced the ring nicely. It’s a neat, geometric solution to using a pearl from a necklace and I love that I’m allowing inherited jewellery to continue to be used and enjoyed.

Finished Ring:

Tidal Pearl Rings

Becca Williams Tidal Pearl Ring 300dpi

 

Looking back at the blog, as I tend to do at this time of year, it’s become pretty obvious that I’ve made a fair few rings recently¬†and, on balance, I’m pretty happy about that.

For a while I’ve been asked at shows and fairs if ‘I do that as a ring’ and whether I ‘make rings to commission’ (answer: yes, I’ll make anything to commission …) and I’ve spent some time during 2014 designing rings to sit alongside my existing work (like these stacking Flotsam ones) and to inspire new collections for the coming year. Here’s the final new addition to the online store in 2014:

Beautiful Seaside basics …

posted in: Jewellery 0

I’ve been feeling the need for things to be a little simpler lately. Don’t get me wrong, I adore my new Beachcomber pieces but I also like wearing neat, simple everyday jewellery that can handle a tough week in the workshop and doesn’t need to be taken off when you get in the shower, still half asleep, in the morning.

And, for that matter, it’s nice to have jewellery that you can sleep in.

So a couple of months ago I made myself these:

and I haven’t really taken them out since. Sure, I’ve changed them for more special or dressy occasions but they’ve always gone right back in again after.

They’re silver and lightly reticulated, meaning that they’ve been heated to the point where the silver just begins to turn liquid – then cooled off to preserve the wonderful, slightly rough texture that that leaves behind:

It burnishes up to a lovely, warm glow that looks soft and natural.

I’ve put a small range together:

Simple pendants in silver (with a red gold accent):

Stacks of bangles, also silver with a red gold accent:

and rings (silver and red gold):

which I’m testing myself – they wear beautifully and feel really summery!

You can find the whole range right here