Recycled Engagement Ring

posted in: Commissions 0

I was recently asked to remodel a shop bought engagement ring. It was made in a design which just didn’t suit the customers lifestyle and as a result of this the diamond had come out the setting. The customer wanted to continue to wear the sentimental stone but felt that it would simply break again if I repaired the current ring.

Now this lady freely admits to being heavy handed so the new ring had to be super sturdy, low (to avoid catching on things) and needed to suit her other rings. The metal that I had to work with was 18ct White Gold but the customer has a soft spot for red gold and wanted to incorporate some of that too.

We worked out a design with a stripe of red gold, which would add a splash of colour but still match the rest of her white gold wedding set. She also loved the idea of a really handmade finish so hammering the surface was a good way of achieving this.

Recycling the Old Ring:

I began work by sawing the old 18ct white gold ring in two and rolling these halves into new pieces of wire. I bought square, 9ct Red Gold wire, and rolled that down to match the white gold. I bent these wires round into rings, soldered up the joints and was left with three rather thin new rings:

Making the New Ring:

I layered these thin rings up (double and then triple checking that I had the red one in the middle!) before clamping them with cotter pins. These held everything in place while I soldered the stack together. You can just see in the photo that I’ve lined up the solder joints in all three of the narrow rings so that I can find it again. I’ll cut the final ring here to add the setting for the diamond.

Once the ring had cooled and I’d cleaned it up I filed the surface smooth and could begin to see neat stripes of colour appearing.

I textured the ring by gently hammering it against a steel mandrel. Using the ball head of a hammer I built up a texture of small, round hammer marks which catch the light beautifully.

From here I cut through the ring and filed out a gap to fit a tapered circular tube. This will form the new setting for the diamond. I soldered this into place (conveniently forgot to take a photo) and the main structure of the ring was done. From there I polished it, sent it off for hallmarking in Birmingham and set the stone.

Finished Ring – Recycled 18ct White Gold, 9ct Red Gold & Diamond:

The resulting ring is a really nice blend of the old and the new. Using the original gold and a sentimental diamond keeps a connection to the past but provides and new ring that can be worn and enjoyed.

 

 

Snowflake Diamond Engagement Ring

Sketching the Ring:

This ring evolved from a request for a classic, dainty ring with lots of sparkle and a contemporary twist. A lot of sketching ensued and I eventually narrowed it down to an asymmetric, cluster style ring using a mixture of diamond shapes. I love pear shaped stones, so being able to use a few of those was a bonus:

 

My very accommodating customer gave me free rein to chose the diamonds themselves and I found a beautiful, clear D colour stone for the centre. I matched the outer stones to this for a unified feel and set to work drawing the final design up in CAD.

Making the Ring:

With the ring rendered fully on a computer I printed it in casting resin, a process which allows a 3D printed piece to be put through traditional lost wax casting production. The result was a perfect replica of my original drawing, cast in platinum. I checked it for size (as shrinkage occurs during the casting process) and stretched it a little to make it a size I.

The 3D printing and casting process left a rough texture on the surface of the ring so I filed and sanded it gently, removing marks and smoothing out the profile of the knife edged section on the band of the ring. After that I polished the whole piece, bringing the platinum up to a bright shine:

Finished Ring:

Fully set the final ring is pretty stunning and has a beautiful, delicate sparkle. The polished platinum sets off the diamonds beautifully and the asymmetric layout of stones really works. This ring has now gone off to it’s new home:

Commission: Recycled Diamond Earrings

posted in: Commissions 0

Sometimes I get asked to recycle old family jewellery into something new and these earrings are a great example of this:.25 carat diamond studs

They’re simple, classic diamond studs but they’re made from one new diamond and one old one, taken from a client’s unworn engagement ring. It seemed a shame to leave this sentimental stone in a box so I matched another diamond to it and now she has a great pair of wearable earrings with a personal story.

 

Original Engagement Ring shank with the brand new Diamond Earrings
Original Engagement Ring shank with the brand new diamond earrings

Commission: Palladium & Diamond Engagement Ring

posted in: Commissions 3

At the start of the year I made this diamond and palladium engagement ring, for some friends who will be getting married next year. Now that the proposal has happened (and she said ‘yes’) I’m safe to post the photographs without ruining the surprise!

Palladium Diamond Wave Engagement Ring

This ring was designed to be really wearable, but still have a substantial bit of sparkle about it, with a prominent central diamond that’s set quote low – so as not to scratch and catch.

It has a really subtle, curved knife section band, with a comfortable rounded side which sits on your finger and a soft point that faces outwards, forming that bright, polished line which runs around the band and draws your eye right along to the diamond.

The diamond itself is Canadian, a beautiful Princess Cut which is securely set in a bezel.

Here’s how it was made, from drawings to ring: